Litchi

and Litchi and AirData UAV are excited to provide users with the ability to automatically synchronize their Litchi flights with the Airdata.com analysis for superior end-to-end flight experience. If configured, Litchi will automatically upload flight records to Airdata.com when: The motors are turned off at the end of the flight Whenever connectivity change is detected and Internet becomes available 5 seconds after the App starts

 

Configuration Instructions for Litchi

1. Register for your Airdata UAV account. If you already have an Airdata UAV account, skip ahead to step #3.
   
   
   
   
   
   
   
   
2. Enter your information in the form. After submitting, wait a few minutes for a verification email:
   
   
   
   
   
   
   
   
3. After verifying your email, you will be logged in. Click "My Account" to access your account settings:
   
   
   
   
   
   
   
   
4. In the account settings, click the "Auto Upload Token":
   
   
   
   
   
   
   
   
5. This is where you find your Token (the token below is just an example, it's NOT your token):
   
   
   
   
   
   
   
6. On your Tablet, open the Litchi App, then click the Settings button at the top right:
   
   
   
   
   
   
   
   
7. Click 'AIRCRAFT', then scroll down a little bit until you find the Airdata UAV settings. Enter your Token here:
   
   
   
   
   
   
   
   
8. Click "Test" to make sure you entered your Token correctly:
   
   
   
   
   
   
   
   
9. You are all set! Your future flights will show up in Airdata.com automatically!
   
   If you have existing flights with Litchi, these will get automatically uploaded as well (see FAQ).
   
   
   
   
   
   

   FAQ - Frequently Asked Questions

   1. Can I upload CSV files myself, instead of using the auto-upload?
      Yes, you can use the regular upload page to upload the Litchi V2 CSV files.
      Flight log storage locations:
      Android: Android/data/com.aryuthere.visionplus/files/flightlogs
      iOS: When accessing from a Mac, connect your iOS device and open the Finder. Select your device from the list in Finder. Click on "Files". In the list of apps, find and select Litchi. Drag and drop the "flightlogs" folder to your desktop or another folder. Once there, you can upload the logs to AirData.
      
      
   2. Not all my flights from Litchi are uploaded, why?
      Only "V2" logs (created by Litchi version 2.2.0 or newer, released on Oct 1st 2015) are supported and will be uploaded. Older logs do not contain all the required information.
      You can tell if a log is "V2" if the filename has "V2" in it.
      
      
   3. Is Phantom 2 supported?
      Unfortunately no. Phantom 2 does not record all the required information. Both auto-upload and manual CSV upload will not work for the P2.
      
      
   4. Are Litchi and Airdata UAV the same company?
      No, Litchi and Airdata UAV are 2 separate entities and are just collaborating for a superior end-to-end flight experience.